Musketeer Rapier [SHARP/BLUNT]

IMG_20190131_122233.jpg
IMG_20190131_122138.jpg
IMG_20170510_152723296_HDR.jpg
IMG_20190131_122149.jpg
IMG_20190131_122159.jpg
IMG_20190131_122205.jpg
IMG_20190131_122208.jpg
IMG_20190131_122216.jpg
IMG_20190131_122219.jpg
IMG_20190131_122223.jpg
IMG_20190131_122233.jpg
IMG_20190131_122138.jpg
IMG_20170510_152723296_HDR.jpg
IMG_20190131_122149.jpg
IMG_20190131_122159.jpg
IMG_20190131_122205.jpg
IMG_20190131_122208.jpg
IMG_20190131_122216.jpg
IMG_20190131_122219.jpg
IMG_20190131_122223.jpg

Musketeer Rapier [SHARP/BLUNT]

1,000.00

This rapier is based on a film/tv prop used by Madds Mikkelsen's Rochefort in the 2011 version of The Three Musketeers.  It's an ambidextrous design featuring an ornately etched plate and two sweeping side rings.  

The hilt is steel, and the etched plate is secured with steel screws and then welded in place. The spiral carved grip is ABS with a steel wire wrap and brass wire turk's head knots.  

This hilt can be mounted with a SHARP, taken from a Cold Steel Shell Hilt Rapier, or a custom Arms & Armor HEMA blunt.  The Cold Steel sharp iss actually a lovely blade, with extremely deep hollow-ground edges and a long fuller.  The A&A blunt is also lovely and long with a flat cross section at the foible for extra flex.

Overall weight with sharp blade is 3 lbs, and the POB is about 2" in front of the guard. The sword is 50" long overall, with a 43" blade.

With the blunt for HEMA work, the sword is 3.125 lbs, and the POB is about 4" in front of the guard. The sword is 51" long overall, with a 44" blade.

For an additional $250, I can send you both blades for an interchangeable sharp/blunt setup.

If you like this hilt and are interested in having it mounted with a different blade, please contact me..

           

Add To Cart