Sapphire Star Wedding Sword [ALUMINUM]

PXL_20240108_204457047.jpeg
PXL_20240108_204441758.jpeg
PXL_20240108_204629257.jpeg
PXL_20240108_204041192.jpeg
PXL_20240108_204217776.jpeg
PXL_20240108_204113225.jpeg
PXL_20240108_204233684.jpeg
PXL_20240108_204228792.jpeg
PXL_20240108_204210119.jpeg
PXL_20240108_204150555.jpeg
PXL_20240108_204132450.jpeg
PXL_20240108_204049997.jpeg
PXL_20240108_204549699.jpeg
PXL_20240108_204338040.jpeg
PXL_20240108_204144486.jpeg
PXL_20240108_204106319.jpeg
PXL_20240108_204457047.jpeg
PXL_20240108_204441758.jpeg
PXL_20240108_204629257.jpeg
PXL_20240108_204041192.jpeg
PXL_20240108_204217776.jpeg
PXL_20240108_204113225.jpeg
PXL_20240108_204233684.jpeg
PXL_20240108_204228792.jpeg
PXL_20240108_204210119.jpeg
PXL_20240108_204150555.jpeg
PXL_20240108_204132450.jpeg
PXL_20240108_204049997.jpeg
PXL_20240108_204549699.jpeg
PXL_20240108_204338040.jpeg
PXL_20240108_204144486.jpeg
PXL_20240108_204106319.jpeg
Sold

Sapphire Star Wedding Sword [ALUMINUM]

$0.00

This sword was commissioned by the groom to wear at his wedding. The design was created from an initial concept sketch he provided, and after a good bit of development, this is the result. The blade is 7075-T6 aluminum with epoxy-filled etching running it’s full length. The faceted hilt is steel and brass with a black leather covered grip bound in brass wire. Each face of the guard is set with a faceted teardrop sapphire (lab grown).

Overall Length: 35.5”
Blade Length: 28”
Weight: 2.5 lbs

Add To Cart