Musketeer Dish Hilt Rapier 2 [SHARP]

PXL_20210312_223229542.jpg
PXL_20210312_222959646.jpg
PXL_20210312_222937046.jpg
PXL_20210312_222943096.jpg
PXL_20210312_223033159.jpg
PXL_20210312_223127380.jpg
PXL_20210312_223046432.jpg
PXL_20210312_223054727.jpg
PXL_20210312_223104384.jpg
PXL_20210312_223141965.jpg
PXL_20210312_223201536.jpg
PXL_20210312_223206584.jpg
PXL_20210312_223212661.jpg
PXL_20210312_223310401.jpg
PXL_20210312_223312266.jpg
PXL_20210312_223330277.jpg
PXL_20210312_223229542.jpg
PXL_20210312_222959646.jpg
PXL_20210312_222937046.jpg
PXL_20210312_222943096.jpg
PXL_20210312_223033159.jpg
PXL_20210312_223127380.jpg
PXL_20210312_223046432.jpg
PXL_20210312_223054727.jpg
PXL_20210312_223104384.jpg
PXL_20210312_223141965.jpg
PXL_20210312_223201536.jpg
PXL_20210312_223206584.jpg
PXL_20210312_223212661.jpg
PXL_20210312_223310401.jpg
PXL_20210312_223312266.jpg
PXL_20210312_223330277.jpg
Sold

Musketeer Dish Hilt Rapier 2 [SHARP]

$0.00

This rapier was inspired by a film prop used by Madds Mikkelsen's Rochefort in the 2011 version of The Three Musketeers.  It's an ambidextrous design featuring an ornately etched plate and two sweeping side rings.  

The hilt is steel, and the etched plate is secured with steel screws. The grip is PETG with a steel wire wrap and nickel silver ferrules.

It’s mounted with a sharp Cold Steel blade from their Ribbed Shell Hilt rapier, which is quite a nice blade with deep hollow ground edges and a very long fuller.

The sword is 2.6 lbs, and the POB is about 4.5" in front of the guard. The sword is 49" long overall, with a 44" blade.

The scabbard is black leather over a flexible core with steel and nickel silver fittings.            

Add To Cart