This pipe-axe head is cast tool steel mounted on a hickory handle.  I don't make these axe heads myself. I buy the raw cast heads, clean them up and fit them to handles.

These axes mount "tomahawk style", which means the eye of the axe head is tapered to match a tapered shaft....i.e. the axe can't come off the end of the haft because the  eye is smaller at the top than at the bottom.  They are mounted by carefully matching that taper at the top of the wood haft, then sliding the haft in from above.  Then it's pounded into place to ensure a tight fit.

This axe head is pinned in place for extra safety.

Available sharp or blunt.

Weight: 1.24 lbs
Overall Length: 22”
Width of Head: 8”