This sword is inspired by Zorro’s sword from the film The Mask of Zorro with Antonio Banderas and Anthony Hopkins, made by Tony Swatton. It’s mounted with a modified sharp Hanwei rapier blade. It’s also available with a blunt version of the same blade.

The hilt is etched and carved stainless and mild steel. The grip is solid PETG covered in black leather with nickel plated tacks and steel ferrules.

Weight: 1.86 lbs
Blade Length: 31”
Total Length: 38.25”
POB: +1.75”

The sword is available with an optional heavy leather scabbard with white brass fittings.

This sword is inspired by Zorro’s sword from the classic TV series starring Guy Williams

It’s mounted with a 34” sharp rapier-style blade by Kingston Arms.

The guard is laser sintered 316L stainless steel. The grip is solid PETG covered in black leather lace.

The pommel is threaded 6mm.

Overall Length: 40.5”
Weight: 1.5 lbs
POB: +3”

Available with or without a black leather scabbard with white brass fittings.

This rapier has a hilt of laser-sintered 316L stainless steel with a blued finish, produced from a 3D scan of a hand-built piece. The outside of the guard features 2 side rings with a cutout detail in the center of each. The counterguard has 3 swept bars. The quillion tips, pommel, and the central details of the side rings are etched and faux gilded.

It’s mounted with a sharp blade made by Chinese forge Strikeblade. The blade finish has some minor flaws on close inspectino, but the edge geometry is excellent. There’s no secondary bevel at all.

The grip is solid PETG covered in black leather with twisted brass wire and brass ferrules. The pommel is secured with a recessed hex nut threaded 6x1mm

Weight: 2.1 lbs
Blade Length: 38”
Overall Length: 44”
POB: +3.25” from quillions

The scabbard is black leather with brass fittings.

This rapier is based on a piece by early 17th century German sword-maker Clemens Wopper which is on display at the Metropolitan Museum of Art. I’ve created a matching parrying dagger design to go with it.

The sword hilt is formed of hexagonal bars with large twisted ball details on the quillions, finger rings and outer rings. The counterguard is an unusual style formed from intersecting loops. The pommel is partially hollow and features the same design motif. It secures with a 6mm pommel nut.

Guards and pommels are laser sintered 316L Stainless steel with an antiqued finish.

The rapier is mounted with a multi-fullered 39” sharp blade by Nicholas Cochiolo. The dagger sports a single fullered blade.

The spiral carved grips are solid PETG wrapped in steel wire with bronze-colored wire accents and turk’s head knots.

Rapier-
Blade Length: 39”
Overall Length: 45.25”
Weight: 2.42 lbs.
POB: +4.75”

Dagger-
Blade Length: 12”
Overall Length: 18”
Weight: 1.1 lbs.

The rapier comes with a leather scabbard with brass fittings (if you prefer black/sliver, or black/brass, let me know). I can build a scabbard for the dagger that will be a close match to the rapier scabbard for and additional $250.

This transitional rapier features an etched dish plate over a hilt of laser sintered 316L stainless steel. It has long quillions and symmetrical sweeping bars offering ambidextrous hand protection. The dish guard secures with screws.

The spiral carved grip is solid PETG covered in black leather and bound with copper wire. The pommel is threaded 6×1mm.

The sword is mounted with a blunt Hanwei rapier blade for stage combat.

Optional black leather scabbard with brass or white brass fittings —specify color in the order comments please.

Overall Length: 43"
Blade Length: 37"
POB: +3”
Weight: 2.2 lbs

This is also available with a sharp Kingston Arms rapier blade of similar proportions.

This sidesword is based on an antique piece listed as a “Saxon Heavy Sword” circa 1600. The bars have a complex cross-shaped cross section with round beaded details. I’ve done my best to reproduce it in laser-sintered stainless steel with an antiqued finish. The grip is PETG covered in steel wire. The ribbed pommel is threaded 6mm. It’s mounted with a sharp Kingston Armory sidesword blade.

Overall Length: 41.5”
Blade Length: 35”
POB: +3”
Weight: 3.1 lbs

The scabbard, also by Kingston Arms, is leather over a wood core with steel fittings.

This rapier has a classic symmetrical 3-ring swept hilt design with beaded sections at the center of each ring. The quillions curve in opposite directions. The guard and pommel are laser sintered 316L stainless steel The gip solid PETG covered in brass and steel wire with steel turks head knots. The pommel secures with a 6mm pommel nut.

It’s mounted with 40” sharp rapier blade by Darkwood Armory.

Blade Length: 40”
Overall Length: 46"
Weight: 2.3 lbs
POB” +4.75"

Optional scabbard is black leather with white brass fittings. If you’re interested in having the hilt blued, antiqued, or electroplated in brass/copper/bronze, email me at info@jessbelsky.com.

This sword is inspired by Zorro’s sword from the film The Mask of Zorro with Antonio Banderas and Anthony Hopkins, made by Tony Swatton. It’s mounted with a modified sharp Hanwei rapier blade. It’s also available with a blunt version of the same blade.

The hilt is etched and carved stainless and mild steel. The grip is solid PETG covered in black leather with nickel plated tacks and steel ferrules.

Weight: 1.86 lbs
Blade Length: 31”
Total Length: 38.25”
POB: +1.75”

The sword is available with an optional heavy leather scabbard with white brass fittings.

This rapier is inspired by Inigo Montoya’s sword from The Princess Bride. The rapier hilt is brass-plated stainless steel and has an ambidextrous two ring design covered in etching.

The spiral carved grip is PETG covered in white leather with twisted brass wire and floral patterned brass ferrules. The ricasso is covered in a leather sleeve decorated with gold foil.

It’s mounted with a 36” sharp rapier blade from Darkwood Armory. The pommel is direct threaded 6mm.

The scabbard is brown leather with brass fittings.

Weight: 2.6 lbs
Overall Length: 42.5”
Blade Length: 36”
POB: +3.25”

This rapier is based on an antique piece sold at auction, dubbed the “Skeleton Rapier”. The symmetrical 3-ring structure is decorated with twisted bead details, as are the quillion tips and the end of the knucklebow.

It’s mounted with a narrow 39” sharp blade by Nicholas Cochiolo.

The guard is laser sintered stainless steel. The grip is PETG wrapped in steel wire. The pommel is threaded 6mm.

Blade Length: 39”
Overall Length: 45.25"
Weight: 2.7 lbs
POB” +2.75"

The optional scabbard is black leather with white brass fittings.

This rapier has a classic form with 3 rings on the outside of the hilt and a 3-bar counterguard. All the outside bars have a diamond shaped cross section.  The guard is laser sintered 316L Stainless steel and the pommel is mild steel. Both are blackened.

It is currently mounted with a sharp 37” rapier blade by Kingston Arms. Also available with a blunt Hanwei Practice Rapier blade for Stage Combat.

The spiral carved grip is solid PETG wrapped black steel wire with copper turks head knots. The pommel is threaded 6x1mm.

Blade Length: 37”
Overall Length: 43.5”
POB : +2.75”
Weight: 2.1 bs

The optional scabbard is tan leather with brass fittings.

This rapier has a classic form with 3 rings on the outside of the hilt and a 3-bar counterguard. All the bars have an octagonal cross section and the rings have a small bead detail at their center.  The guard is laser sintered 316L Stainless steel and the ribbed pommel mild steel. It is mounted with a sharp 37” rapier blade by Kingston Arms.

The spiral carved grip is solid PETG wrapped in steel wire with turks head knots. The pommel is threaded 6x1mm.

Overall weight is 2.6 lbs, and the POB is +2.5" in front of the guard. The sword is 43" long overall.

Optional scabbard is black leather with white brass fittings.

Also available with a blunt Hanwei Practice Rapier blade for Stage Combat.

This rapier hilt has a side ring and two sweeping bars on each side, each with a central bead detail. The long quillions curve laterally. It’s matched with a faceted pommel and a wire wrapped grip.

The sharp 42” fullered blade is by Darkwood Armory.

The guard and pommel are made of laser sintered stainless steel. The pommel is threaded 6mm.

Blade Length: 42”
Overall Length: 48”
POB: 4.5” from Quillions
Weight: 2.5 lbs.

The scabbard is black leather over a flexible rubber core with a steel chape.

This rapier has a classic ambidextrous swept design with 2 parallel bars below a side ring on each side of the guard. All the bars have a faceted cross section.  The guard and faceted urn-shaped pommel are laser sintered 316L Stainless steel.

It is mounted with a sharp 38” rapier blade made by Chinese forge Strikeblade.

The grip is solid PETG wrapped copper and blackened steel wire with copper turks head knots. The pommel is secures with a 6x1mm pommel nut.

Blade Length: 38”
Overall Length: 44.5”
POB : +3.25”
Weight: 2 bs

The optional scabbard is tan leather with brass fittings.

This rapier hilt has been made fairly large to suit the imposing 42” fullered blade it’s mounted with. The cup is formed of 8 lobes and secured to the arms of the guard with screws. Additional swept side bars sit below the cup offering reinforcement and additional hand protection.

The guard is made of laser sintered stainless steel with an antiqued gray finish. The grip is wire over PETG with turks head knots. The sharp blade is by Darkwood Armory. The pommel is threaded 6mm.

Blade Length: 42”
Overall Length: 49”
POB: 3.5” from Quillions
Weight: 2.8 lbs.

This rapier hilt features a heavily perforated 8-lobe cup reinforced with swept side bars. The quillions and knucklebow have ovoid bead details. The cup secures to the arms of the guard with screws. The guard is laser sintered 316L stainless steel.

The mild steel pommel is threaded 6×1mm. The grip is PETG covered in purple leather lace.

The sword is currently mounted with a blunt Hanwei rapier blade for stage combat and can come with an optional black leather scabbard with white brass fittings.

This is also available with a sharp rapier blade of the same profile, also by Hanwei.

Overall Length: 43"
Blade Length: 36.5"
POB: +2.25”
Weight: 2.25 lbs

This sidesword is based on the swords attributed to the Munich Town Guard. It has a simple two ring design with a 4-bar counterguard.

The guard and pommel are laser sintered stainless steel with an antiqued finish. The solid PETG grip is wrapped in blackened steel and copper wire. The ovoid pommel is keyed to the tang and secures with a recessed 6mm pommel nut

It’s mounted with a sharp Kingston Arms sidesword blade. The scabbard is leather over a wood core, also by Kingston Arms.

Overall Length: 41”
Blade Length: 35”
POB: +3.5”
Weight: 2.7 lbs

This sidesword features stacked side rings with a three-bar swept counterguard in blued 316L stainless steel. The 6-sided teardrop pommel is mostly hollow, allowing for a sizable visual presence but relatively low weight.

The matching dagger has a side sing for hand protection.

The grips are blue leather lace over solid PETG. The sword secures with a 6mm pommel nut, while the dagger pommel is direct threaded 6×1mm.

The sword is mounted with a sharp blade by Kingston Arms, and comes with a wood-core scabbard, also by Kingston Arms. The dagger scabbard is leather with steel fittings.

Sword:
Overall Length: 41"
Blade Length: 35"
POB: +4.5”
Weight: 2.35 lbs

Dagger:
Overall Length: 17.5”
Blade Length: 12”
Weight: 0.9 lbs

This is my third reproduction of one of several matching weapons by Anton Schuch for the Saxon Trabantenleibgarde c.1600. One is detailed here: http://www.lennartviebahn.com/arms_armour/antiques/rapier_anton_schuch.html

Two other nearly identical swords are on display at the Walters Museum in Baltimore and the Philadelphia Museum of Art (pictures with black background show the antique original).

The two-ring guard and ovoid pommel are blued laser sintered stainless steel. The grip is PETG covered in leather and wire. The hilt is secured with a pommel nut.

My recreation is mounted with a sharp Kingston Arms sidesword blade.

Weight is 2.4 lbs. The blade is 34.5" long, and the sword is 41" overall. The sword balances 4" in front of the quillions.

The scabbard is leather over a wood core with steel fittings, also by Kingston Arms.

This hilt is formed of hexagonal bars that make up a symmetrical 5-ring design with an etched plate covering the top rings. The guard plate secures with screws.

The guard is laser sintered 316L stainless steel with a carved stainless steel shell. The fluted pommel is threaded 6mm. The grip is solid PETG wrapped in brown leather and brass wire.

The 36” blunt stage combat blade is a modified Hanwei Practice Rapier.

Comes with a brown leather scabbard with brass fittings.

Overall weight is 2.85 lbs, and the POB is +3" in front of the guard. The sword is 42.5" long overall.

This is also available mounted with a slightly narrower Kingston Arms sharp rapier blade.

This hilt is formed of delicate hexagonal bars that make up a symmetrical 5-ring design with a carved shell plate covering the top rings. The guard plate secures with screws.

The guard is laser sintered 316L Stainless steel, blued to a dark finish. The pommel is threaded 6mm. The grip is solid PETG wrapped in brown leather lace and steel wire.

The 37” sharp blade is by Kingston Arms.

Comes with a brown leather scabbard with white brass fittings.

Overall weight is 2.14 lbs, and the POB is +3" in front of the guard. The sword is 43.25" long overall.

A classic loop hilt rapier with a guard in laser sintered 316L stainless steel. The rapier is mounted with a 37" sharp Kingston Arms Rapier Blade.  Grip is PETG with a steel wire wrap. Mild steel pommel is threaded 6mm.

Overall the sword is 43" long. It weighs 2.55 lbs and balances 2.5” in front of the quillions.

Optional scabbard is black leather with white brass fittings.

Also available with a blunt Hanwei Practice Rapier blade for Stage Combat.

A classic loop hilt rapier with a guard in laser sintered 316L stainless steel. It’s mounted with a robust 38.5" sharp blade from Mayhawke Armory.  Grip is PETG with a steel wire wrap. Mild steel pommel is threaded 1/4-20.

Overall the sword is 44.25" long. It weighs 2.95 lbs and balances 4.5” in front of the quillions.

Scabbard is black leather with steel fittings.

This rapier was inspired by the Musketeer’s sword in the 90’s Disney version of the Three Musketeers. This particular version has a fileworked ferrule on the grip, matching the film prop attributed to Kiefer Sutherland’s Athos character

The guard is laser sintered stainless steel with decorative details filled with translucent blue epoxy to mimic enameling. The grip is solid PETG covered in black leather bound with steel wire. The pommel is mild steel, threaded 6x1mm, with blue painted fluting.

It’s mounted with a sharp 37” Kingston Arms rapier blade. A blunt version is also available.

The scabbard is black leather with white brass fittings.

This parrying dagger was inspired by the Musketeer’s sword in the 90’s Disney version of the Three Musketeers.

The guard is laser sintered stainless steel with decorative details filled with translucent blue epoxy to mimic enameling. The grip is solid PETG covered in black leather bound with steel wire. The pommel is mild steel, threaded 6x1mm, with blue painted fluting.

It’s mounted with a sharp 12” steel blade .

The scabbards is black leather with steel fittings.

This rapier was inspired by Westley’s sword from The Princess Bride.  The guard is an ambidextrous two ring design, simple but elegant. Good if you’re left handed or just pretending to be. ….

I’ve embellished the original design with Wesley’s iconic “as you wish” etched onto the ricasso.

The guard and pommel are laser sintered stainless steel. The grip is solid PETG covered in black leather lace.

It’s mounted with a sharp Kingston Arms rapier blade.

The optional scabbard is black leather with white brass fittings.

Blade Length: 37”
Overall Length: 43”
PoB: +3.35”
Weight: 1.75 lbs

This rapier was inspired by Westley’s sword from The Princess Bride.  The guard is an ambidextrous two ring design, simple but elegant. Good if you’re left handed or just pretending to be. ….

The guard and pommel are laser sintered stainless steel. The grip is solid PETG covered in black leather lace.

It’s mounted with a sharpened Kingston Arms rapier blade.

Optional scabbard is black leather with white brass fittings.

Blade Length: 37”
Overall Length: 43”
PoB: +3.35”
Weight: 1.75 lbs

Also available with a blunt Hanwei Practice Rapier blade for Stage Combat.

A steel-hilted smallsword mounted with an Indian-made reproduction blade of triangular section. The tip is sharp, but I would not consider it to be “battle ready” based on the thickness of the tang and unknowns about the heat treatment.

The hilt is laser sintered stainless steel. The guard plate is etched with a floral design, and the solid PETG grip is wrapped in wire. The knucklebow pins into the pommel in the traditional manner, and the pommel is secured with a 6mm pommel nut.

Weight: 1.17 lbs.
Blade Length: 30.5”
Overall Length: 37”
POB: +3” in front of the guard

The scabbard came with the blade and is leather over a wood core with white brass fittings. I have belt clips available for this kind of 2-ring scabbard on the Carriers & Scabbards page here.

A steel-hilted smallsword mounted with an Indian-made reproduction blade of the colichemarde type, featuring a wide forte tapering abruptly to a narrow triangular section. The tip is sharp, but I would not consider it to be “battle ready” based on the thickness of the tang and unknowns about the heat treatment.

The hilt is laser sintered stainless steel. The solid PETG grip is wrapped in wire. The knucklebow pins into the pommel in the traditional manner, and the pommel is secured with a 6mm pommel nut.

Weight: 1.17 lbs.
Blade Length: 30.5”
Overall Length: 37”
POB: +3” in front of the guard

The scabbard came with the blade and is leather over a wood core with white brass fittings. I have belt clips available for this kind of 2-ring scabbard on the Carriers & Scabbards page here.

This cutlass/hanger has a hilt purloined from the Hanwei Practical Mortuary Sword paired with the blade from Kingston Arms Revolutionary War Hanger to create a sword inspired by the weapon Captain Flint wields in the first season of Black Sails. That prop weapon was built using this same hilt.

The hilt is stainless steel and secures with a 6mm pommel nut.  The grip is brown leather over a wood core bound with steel wire.

The scabbard is brown leather over a wood core with steel fittings.

Blade Length: 24”
Overall Length: 30.5”
POB: +2.5”
Weight: 2.25 lbs.