~All In-stock BLUNT weapons~
All the blunt-bladed weapons I have in stock right now are gathered on this page, with the exception of stage combat knives which can be found HERE.
~ Medieval Weapons ~
A blunt stunt-worthy Duncan Macleod Highlander katana. This sword has a 1/4” 7075-T6 Aluminum blade with a full-thickness rounded edge (i.e. no edge bevel). Most uniquely, however, is the dragon tsuka (handle), which is made from 3D-printed aluminum. This enables a compression mounting with a recessed hex nut hidden in the dragon’s nose. That in turn means the sword rings when struck, which isn’t usually the case with resin handles.
The aluminum gip is treated with stain to bring out the details and sealed with polyurethane sealer.
The rooster tsuba and habaki are a single piece of stainless steel with a hot-brass brushed finish.
Weight: 2.11 lbs
Overall Length: 42”
Blade Length: 29”
POB: +3/4”
This hand-and-a-half broadsword is mounted with a Hanwei/Tinker sharp bastard blade. The guard and pommel are blackened laser-sintered 316L stainless steel (pommel design by Mike Jia). The grip is green leather over solid PETG. The pommel secures with a recessed nut which is threaded 6x1mm metric.
The stats are as follows:
Weight: 2.66 lbs
Overall Length: 42.5”
Blade Length: 335”
POB: +4.25” from base of blade
It is also available mounted with the H/T blunt bastard blade—select the blunt option when you add it to your cart.
The optional brown scabbard is by Windlass Steelcrafts and has an integral belt and a semi-rigid leather core covered in suede.
A longsword with a Witcher-inspired guard and Printed Armory wheel pommel. The blade is a Tinker/Hanwei Blunt Longsword blade for stage combat.
The guard and pommel are laser sintered stainless steel. The grip is PETG covered in red leather with a stainless steel mid-grip ring. The hilt secures with a 6mm recessed nut.
Weight: 3.17 lbs
Overall Length: 46.75”
Blade Length: 35”
POB: +3.5”
~ basket hilts & spadroons ~
![Mask of Zorro 2026 [SHARP/BLUNT]](https://images.squarespace-cdn.com/content/v1/55ac289ce4b00075640a70e2/f1e5b8d3-457a-45f5-bc60-55189f2afeea/PXL_20260728_200628974.jpeg)
This sword is inspired by Zorro’s sword from the film The Mask of Zorro with Antonio Banderas and Anthony Hopkins, made by Tony Swatton. It’s mounted with a modified sharp Hanwei rapier blade. It’s also available with a blunt version of the same blade.
The hilt is etched and carved stainless and mild steel. The grip is solid PETG covered in black leather with nickel plated tacks and steel ferrules.
Weight: 1.86 lbs
Blade Length: 31”
Total Length: 38.25”
POB: +1.75”
The sword is available with an optional heavy leather scabbard with white brass fittings.
A HEMA Spadroon loosely based on a 1796 British Infantry Officer’s sword. It's fitted with a 36” blade made from a Hanwei Practice Rapier blade. At 1” wide, it’s a robust but lightweight blade that’s good and stiff at this length but still has some flex. I can trim this to your preferred length.
The hilt is laser sintered 316L stainless steel. The shell plate, guard and pommel are all a single piece of steel. The pommel secures with a recessed hex-nut. Grip is solid PETG covered in black leather
Weight: 1.9 lbs
Blade: 36"
OA length: 42"
POB: +5.5"
This sword is inspired by Zorro’s sword from the classic TV series starring Guy Williams
It’s mounted with a 34” blunt musketeer epee blade for stage combat.
The guard is laser sintered 316L stainless steel. The grip is solid PETG covered in black leather lace.
The pommel is threaded 6mm.
Overall Length: 40”
Weight: 1.4 lbs
POB: +1.5”
Available with or without a black leather scabbard with white brass fittings.
~rapiers & smallswords ~
This transitional rapier features an etched dish plate over a hilt of laser sintered 316L stainless steel. It has long quillions and symmetrical sweeping bars offering ambidextrous hand protection. The dish guard secures with screws.
The spiral carved grip is solid PETG covered in black leather and bound with copper wire. The pommel is threaded 6×1mm.
The sword is mounted with a blunt Hanwei rapier blade for stage combat.
Optional black leather scabbard with brass or white brass fittings —specify color in the order comments please.
Overall Length: 43"
Blade Length: 37"
POB: +3”
Weight: 2.2 lbs
This is also available with a sharp Kingston Arms rapier blade of similar proportions.
This sword is inspired by Zorro’s sword from the film The Mask of Zorro with Antonio Banderas and Anthony Hopkins, made by Tony Swatton. It’s mounted with a modified sharp Hanwei rapier blade. It’s also available with a blunt version of the same blade.
The hilt is etched and carved stainless and mild steel. The grip is solid PETG covered in black leather with nickel plated tacks and steel ferrules.
Weight: 1.86 lbs
Blade Length: 31”
Total Length: 38.25”
POB: +1.75”
The sword is available with an optional heavy leather scabbard with white brass fittings.
This rapier has a classic form with 3 rings on the outside of the hilt and a 3-bar counterguard. All the outside bars have a diamond shaped cross section. The guard is laser sintered 316L Stainless steel and the pommel is mild steel. Both are blackened.
It is currently mounted with a sharp 37” rapier blade by Kingston Arms. Also available with a blunt Hanwei Practice Rapier blade for Stage Combat.
The spiral carved grip is solid PETG wrapped black steel wire with copper turks head knots. The pommel is threaded 6x1mm.
Blade Length: 37”
Overall Length: 43.5”
POB : +2.75”
Weight: 2.1 bs
The optional scabbard is tan leather with brass fittings.
This rapier has a classic ambidextrous swept design with 2 parallel bars below a side ring on each side of the guard. All the bars have a faceted cross section. The guard and faceted urn-shaped pommel are laser sintered 316L Stainless steel.
It is mounted with a sharp 38” rapier blade made by Chinese forge Strikeblade.
The grip is solid PETG wrapped copper and blackened steel wire with copper turks head knots. The pommel is secures with a 6x1mm pommel nut.
Blade Length: 38”
Overall Length: 44.5”
POB : +3.25”
Weight: 2 bs
The optional scabbard is tan leather with brass fittings.
This rapier hilt features a heavily perforated 8-lobe cup reinforced with swept side bars. The quillions and knucklebow have ovoid bead details. The cup secures to the arms of the guard with screws. The guard is laser sintered 316L stainless steel.
The mild steel pommel is threaded 6×1mm. The grip is PETG covered in purple leather lace.
The sword is currently mounted with a blunt Hanwei rapier blade for stage combat and can come with an optional black leather scabbard with white brass fittings.
This is also available with a sharp rapier blade of the same profile, also by Hanwei.
Overall Length: 43"
Blade Length: 36.5"
POB: +2.25”
Weight: 2.25 lbs
This hilt is formed of hexagonal bars that make up a symmetrical 5-ring design with an etched plate covering the top rings. The guard plate secures with screws.
The guard is laser sintered 316L stainless steel with a carved stainless steel shell. The fluted pommel is threaded 6mm. The grip is solid PETG wrapped in brown leather and brass wire.
The 36” blunt stage combat blade is a modified Hanwei Practice Rapier.
Comes with a brown leather scabbard with brass fittings.
Overall weight is 2.85 lbs, and the POB is +3" in front of the guard. The sword is 42.5" long overall.
This is also available mounted with a slightly narrower Kingston Arms sharp rapier blade.
This rapier is based on a piece by early 17th century German sword-maker Clemens Wopper which is on display at the Metropolitan Museum of Art.
The hilt is formed of delicate hexagonal bars with large twisted ball details on the quillions, finger rings and outer rings. The counterguard is an unusual style formed from intersecting loops. The pommel is partially hollow and features the same design motif. It secures with a 6mm pommel nut.
Both guard and pommel are laser sintered 316L Stainless steel. PLEASE NOTE: The guard and pommel have some small gouges in them from errors in the fabrication process. They’ve been polished out but are still visible. The price has been adjusted accordingly.
The blunt 37” blade is a Hanwei practice rapier blade for stage combat—it is also available with a similar sharp blade by Kingston Arms.
The spiral carved grip is solid PETG wrapped in purple leather and steel wire.
Optional black leather scabbard with white brass fittings.
Overall weight is 2.1 lbs, and the POB is +3.25" in front of the guard. The sword is 43" long overall.
This rapier has a swept outer guard and no counterguard. The gaurd is mild steel. The grip is solid PETG covered red leather with a spiral riser. The hollow stainless steel pommel secures with a brass pommel nut threaded 6x1mm.
It’s shown mounted with a blunt 36” modified Hanwei practice rapier blade or stage combat.
It’s also available with a modifed 38” Hanwei rapier blade for HEMA Sidesword. With the HEMA blade, the stats are:
Weight: 2.3 lbs
Blade Length: 38”
Overall length: 44.25”
POB: +3.5”
This blade will work with my wider style leather scabbards available HERE.
![Three Musketeers Rapier 2025 -- Athos Ferrule [SHARP/BLUNT]](https://images.squarespace-cdn.com/content/v1/55ac289ce4b00075640a70e2/ae82c86e-b5a5-4934-b454-fc4f12dfe4a7/PXL_20250223_213308028+%282%29.jpeg)
This rapier was inspired by the Musketeer’s sword in the 90’s Disney version of the Three Musketeers. This particular version has a fileworked ferrule on the grip, matching the film prop attributed to Kiefer Sutherland’s Athos character
The guard is laser sintered stainless steel with decorative details filled with translucent blue epoxy to mimic enameling. The grip is solid PETG covered in black leather bound with steel wire. The pommel is mild steel, threaded 6x1mm, with blue painted fluting.
It’s mounted with a sharp 37” Kingston Arms rapier blade. A blunt version is also available.
The scabbard is black leather with white brass fittings.
This parrying dagger was inspired by the Musketeer’s sword in the 90’s Disney version of the Three Musketeers.
The guard is laser sintered stainless steel with decorative details filled with translucent blue epoxy to mimic enameling. The grip is solid PETG covered in black leather bound with steel wire. The pommel is mild steel, threaded 6x1mm, with blue painted fluting.
It’s mounted with a sharp 12” steel blade .
The scabbards is black leather with steel fittings.
This rapier was inspired by the Musketeer’s sword in the 90’s Disney version of the Three Musketeers.
The hilt is laser sintered stainless steel with decorative details filled with translucent blue epoxy to mimic enameling. The grip is solid PETG covered in black leather with steel wire. The pommel is threaded 6×1mm.
It’s mounted with a blunt 38” vintage rapier blade by Hanwei. This is a slightly wider blade than my normal blunt version, which is a better match for the film swords.
The scabbard is brown leather over a fiberglass core with polished aluminum fittings.
Overall Length: 44.5”
Blade Length: 38”
Weight: 2.6 lbs
POB: +4.5”
This rapier was inspired by the Musketeer’s sword in the 90’s Disney version of the Three Musketeers.
The hilt is laser sintered stainless steel with decorative details filled with translucent blue epoxy to mimic enameling. The grip is solid PETG covered in black leather with steel wire. The pommel is threaded 5/16-18.
It’s mounted with a 38” rapier blade made from 7075-T6 Aluminum.
The scabbard isn’t the one show in the photos, it’s one of these: https://jesse-belsky-stageswords.squarespace.com/carriers-belts-1/wide-rapier-scabbard-brown
Overall Length: 44”
Blade Length: 38”
Weight: 1.98 lbs
POB: +2.75”
This rapier was inspired by Westley’s sword from The Princess Bride. The guard is an ambidextrous two ring design, simple but elegant. Good if you’re left handed or just pretending to be. ….
The guard and pommel are laser sintered stainless steel. The grip is solid PETG covered in black leather lace.
It’s mounted with a sharpened Kingston Arms rapier blade.
Optional scabbard is black leather with white brass fittings.
Blade Length: 37”
Overall Length: 43”
PoB: +3.35”
Weight: 1.75 lbs
Also available with a blunt Hanwei Practice Rapier blade for Stage Combat.
This rapier is mounted with a Kingston Arms sidesword guard and steel pommel. The blade is 7075-T6 aluminum for stage combat. The grip is solid PETG covered in faux rayskin. The pommel is threaded 8mm.
Weight: 1.93 lbs
Blade Length: 38”
Overall length: 44”
POB: +3.75”
A parrying dagger with a blunt 11” stage combat blade and a laser-sintered stainless steel ring guard with ball end quillions and a side ring. The pommel is mild steel. The grip is solid PETG wrapped in dark blue leather. Pommel is threaded 6mm. The fuller of the blade feature the etched name of legendary blade-maker Andrea Ferarra.
Comes with a black leather sheath with steel fittings.
A parrying dagger with a blunt 12” stage combat blade and a laser-sintered stainless steel ring guard with upturned quillions. The pommel is mild steel. Both sport a decorative pattern made with parallel cut marks. The grip is solid PETG wrapped in brown leather. Pommel is threaded 6mm.
Comes with a black leather sheath with steel fittings.
A steel-hilted smallsword in the minimalist style sometimes known as a loop-hilt. It’s mounted with a SG #2 Epee Blade from Blue Gauntlet (hence the bronze color). The tang tang hasn’t been trimmed yet, but it will be cut flush to the pommel nut before shipping.
The guard is laser sintered stainless steel. The solid PETG grip is wrapped in black leather lace. The knucklebow pins into the pommel in the traditional manner, and the pommel is secured with a 6mm pommel nut.
Stats with #2 epee blade:
Weight: 0.87 lbs.
Blade Length: 32”
Overall Length: 38.5”
POB: +1.25” in front of the guard
A steel-hilted smallsword currently mounted for HEMA practice. The hilt is heat treated laser sintered 17-4PH stainless steel. The grip is PETG wrapped in steel and brass wire. The knucklebow pins into the pommel in the traditional manner, and the pommel is secured with a 6mm pommel nut.
Stats with #2 Epee:
Weight: 1.06 lbs.
Blade Length: 32.5”
Overall Length: 39.5”
POB: +1.5” in front of the guard
Stats with 31” trimmed epee for stage combat:
Weight: 1.05 lbs.
Blade Length: 31”
Overall Length: 38”
POB: +1.25” in front of the guard
A HEMA-worthy Duncan Macleod Highlander katana. This sword has a custom 28” steel HEMA blade by Castille Armory. The iconic dragon tsuka (handle), is made from 3D-printed aluminum. This enables a compression mounting with a recessed hex nut hidden in the dragon’s nose.
The aluminum gip is currently left bare, but I can treat it with stain to bring out the details—the end result is somewhat brownish.
The rooster tsuba is stainless steel with a hot-brass brushed finish.
Weight: 2.63 lbs
Overall Length: 41”
Blade Length: 28”
POB: +3/4”