~All In-stock ALUMINUM weapons~
All the aluminum-bladed weapons I have in stock right now are gathered on this page, with the exception of stage combat knives which can be found HERE.
~ MEDIEVAL WEAPONS ~
This tulwar has a 7075-T651 aluminum blade for stage combat. The hilt is cast brass, made in India. The aluminum tang is bedded into the hilt with epoxy, and is very secure and rings well.
The grip looks somewhat small compared to some medieval sword hilts, but is a perfect ergonomic fit in the closed hand.
Stats below:
27.5" Blade
33" Overall
POB: +4"
Weight: 1.3 lbs
This tulwar has a 7075-T651 aluminum blade for stage combat. The hilt is cast brass, made in India. The aluminum tang is bedded into the hilt with epoxy, and is very secure and rings well.
The grip looks somewhat small compared to some medieval sword hilts, but is a perfect ergonomic fit in the closed hand.
Stats below:
29" Blade
34" Overall
POB: +5.75"
Weight: 1.5 lbs
This tulwar has a 7075-T651 aluminum blade for stage combat. The hilt is cast brass, made in India. The aluminum tang is bedded into the hilt with epoxy, and is very secure and rings well.
The grip looks somewhat small compared to some medieval sword hilts, but is a perfect ergonomic fit in the closed hand.
Stats below:
29" Blade
34" Overall
POB: +5"
Weight: 1.35 lbs
This is a training weapon I designed in collaboration with Bill Grandy of the Virginia Academy of Fencing. He needed a weapon to use in armored combat practice that would permit strikes with the guard a pommel but wouldn’t ruin armor (or damage the person inside), and retained a stiff blade without being too heavy. After a few prototypes we settled on this design.
It features a blade of 1/4” thick 7075-T6 Aircraft Aluminum with a full-thickness rounded edge. There is a waisted area mid-blade to provide a sure grip when using half-sword techniques. Additional small pieces of aluminum are riveted to the tip, creating a thicker tip (~0.5”) to prevent it from slipping through small gaps in armor and helmets.
There is a steel rod pinned to the end of the tang that provides for a threaded connection with a steel insert inside the pommel.
The pommel and guard are made out of 95 Durometer high density rubber, which provided the best balance of shock absorption and rigidity amongst several test materials. The grip is solid 3D printed PETG plastic wrapped in leather or rubber.
The standard weapon has a round ball pommel. The scent stopper shape is available for a little more money. Both options have a steel threaded insert threaded 3/8-16.
The standard weapon has a bright brushed finish. A higher polish can also be provided, as can fullering, etc. by request.
The stats are as follows:
Weight: 3.2 lbs
Overall Length: 49.25”
Blade Length: 37.5”
Grip Length: 9.25”
POB: +8.25” from base of blade
Edge Thickness: 0.25” (rounded)
Tip Thickness” ~0.5”
Weight: 2.34 lbs.
Bill Grandy posted a video review of this trainer you can check out HERE.
Basic Prices:
Round Pommel: $400
~ BASKET HILTS & SPADROONS ~
~ RAPIERS & SMALLSWORDS ~
This rapier was inspired by the Musketeer’s sword in the 90’s Disney version of the Three Musketeers.
The hilt is laser sintered stainless steel with decorative details filled with translucent blue epoxy to mimic enameling. The grip is solid PETG covered in black leather with steel wire. The pommel is threaded 6×1mm.
It’s mounted with a blunt 38” vintage rapier blade by Hanwei. This is a slightly wider blade than my normal blunt version, which is a better match for the film swords.
The scabbard is brown leather over a fiberglass core with polished aluminum fittings.
Overall Length: 44.5”
Blade Length: 38”
Weight: 2.6 lbs
POB: +4.5”
This rapier was inspired by the Musketeer’s sword in the 90’s Disney version of the Three Musketeers.
The hilt is laser sintered stainless steel with decorative details filled with translucent blue epoxy to mimic enameling. The grip is solid PETG covered in black leather with steel wire. The pommel is threaded 5/16-18.
It’s mounted with a 38” rapier blade made from 7075-T6 Aluminum.
The scabbard isn’t the one show in the photos, it’s one of these: https://jesse-belsky-stageswords.squarespace.com/carriers-belts-1/wide-rapier-scabbard-brown
Overall Length: 44”
Blade Length: 38”
Weight: 1.98 lbs
POB: +2.75”
This rapier is mounted with a Kingston Arms sidesword guard and steel pommel. The blade is 7075-T6 aluminum for stage combat. The grip is solid PETG covered in faux rayskin. The pommel is threaded 8mm.
Weight: 1.93 lbs
Blade Length: 38”
Overall length: 44”
POB: +3.75”
This hand-and-a half broadsword has a diamond section 1/4" thick 7075-T6 Aluminum blade. The guard and pommel are from a Hanwei Rhinelander. The grip is PETG wrapped with faux stingray skin. The pommel secures with a 6mm pommel nut. For more information on this attachment method, CLICK HERE.
Overall Length: 46.5"
Blade Length: 35"
Weight: 2.25 lbs
POB: +1.25” from Guard