This sword design is inspired by the weapons in the film First Knight starring Sean Connery and Richard Gere. King Arthur and his knights all wield distinctive single-handed broadswords. This piece is specifically based on King Arthur’s sword, which sported a silver wire wrapped grip and a distinctive crown-shaped pommel nut/peen block.

The guard is 7075-T6 aluminum, as is the blunt blade. The pommel is stainless steel. The large crosses on the pommel’s faces are filled with deep blue resin. The hilt secures with a 6mm nut. The grip is solid PETG covered in black leather and bound with braided wire.

The stats are as follows:

Weight: ? lbs
Overall Length: ?”
Blade Length: ??
POB: +?” from base of blade

A blunt stunt-worthy Duncan Macleod Highlander katana. This sword has a 1/4” 7075-T6 Aluminum blade with a full-thickness rounded edge (i.e. no bevel). Most uniquely, however, is the dragon tsuka (handle), which is made from 3D-printed aluminum. This enables a compression mounting with a recessed hex nut hidden in the dragon’s nose. That in turn means the sword rings when struck, which isn’t usually the case with resin handles.

The aluminum gip is treated with stain to bring out the details and sealed with polyurethane sealer.

The rooster tsuba is stainless steel.

Weight: 2.16 lbs
Overall Length: 41”
Blade Length: 28”
POB: +0.75”

This short saber was inspired by the weapon Supergirl wields in the Woman of Tomorrow comics. The blade is 7075-T6 aluminum. The guard and pommel are laser sintered 316L Stainless Steel. The grip is black leather over PETG.

This sword was commissioned for a wedding celebration, and is loosely inspired by a sword from the Fire Emblem video game. It features 6 moonstones— one large 30mm stone on each face of the pommel and two smaller stones on each side of the crossguard. The guard is laser-sintered stainless steel, as is the mid-grip ring. The grip is PETG covered in black leather. The broad blade is 7075-T6 aluminum.

This short sword was inspired by the weapon “Wind Cleaver” from the Throne of Glass series by Sarah J. Maas.

On my interpretation the crossguard and faceted pommel are blackened stainless steel. The PETG grip is covered in textured black leather. The blade is black anodized 7075-T6 aluminum.

The scabbard is black leather over a wood core with a brass chape.

At the customer’s request, a tiny silver pendant in the shape of the sword was included as part of the commission.

This huge sword is half of a wedding set. The blade is made of 7075-T6 aluminum with a deeply etched and faux-gilded design running down its center. The guard has a bit of a Warhammer 40k inspiration, but the winged guard features a custom monogram. The guard and pommel are brass. The grip is solid PETG wrapped in embossed brown leather.

The scabbard has a wood core covered in embossed brown leather and elaborate riveted brass fittings to connect the belt suspension.

Blade Length: 38.5”
Overall Length: 51.5”
POB: +2”
Weight: 4.8 lbs

For more information on the companion rapier, click HERE.

This commissioned bastard sword was inspired by the cover art for Kingdom of Ash by Sarah J. Maas. The cover illustration is by Marci Caruso. On my interpretation the steel guard and pommel are deeply etched with Celtic knotwork and electroplated in brass. The pommel sports huge 30 mm faceted glass cabochons on each side. The blade is 7075-T6 Aluminum with an etched glyph on the ricasso and faux-gilded flame etching up the blade. The grip is solid PETG covered in black leather and bound with brass wire. The mid-grip ring is etched brass.

Blade Length: 32.5”
Overall Length: 43”
POB: +1.5”
Weight: 2.45 lbs.

This commissioned bastard sword was inspired by the cover art for Kingdom of Ash by Sarah J. Maas. The cover illustration is by Marci Caruso. On my interpretation the steel guard and pommel are deeply etched with Celtic knotwork and electroplated in brass. The pommel sports huge 30 mm faceted glass cabochons on each side. The blade is 7075-T6 Aluminum with an etched glyph on the ricasso. The grip is solid PETG covered in black leather and bound with brass wire. The mid-grip ring is etched brass.

Blade Length: 32.5”
Overall Length: 43”
POB: +1.5”
Weight: 2.45 lbs.

This sword was inspired by the weapon Hawkeye wields as Ronin. The blade is made from 3/16” thick 7075-T6 Aluminum. The tsuba/guard section is made of painted aluminum while the grip is 3D printed in sintered nylon.

The sword secures with a 5/16-18 recessed hex nut that attaches to a threaded steel rod pinned to the aluminum tang. For more information on this attachment method, CLICK HERE.

Overall length: 34”
Blade Length: 24”
Weight: 1.2 lbs
POB: +2”

A blunt stunt-worthy Duncan Macleod Highlander katana. This sword has a 1/4” 7075-T6 Aluminum blade with a full-thickness rounded edge (i.e. no edge bevel). Most uniquely, however, is the dragon tsuka (handle), which is made from 3D-printed aluminum. This enables a compression mounting with a recessed hex nut hidden in the dragon’s nose. That in turn means the sword rings when struck, which isn’t usually the case with resin handles.

The aluminum gip is treated with stain to bring out the details and sealed with polyurethane sealer.

The rooster tsuba and habaki are a single piece of stainless steel with a hot-brass brushed finish.

Weight: 2.14 lbs
Overall Length: 42”
Blade Length: 29”
POB: +1”

This sword was inspired by Prince Caspian’s sword from the Chronicles of Narnia film of the same name. It’s been re-imagined here as a longsword with somewhat different grip.

The blade is a modified Tinker/Hanwei Blunt Longsword blade for stage combat. The guard and pommel are laser sintered stainless steel. The grip is PETG covered in blue leather with an etched brass spacer ring. The hilt secures with a 6mm recessed nut.

Weight: 4.3 lbs
Overall Length: 47.5”
Blade Length: 35.5”
POB: +2” from base of blade (just at the upper guard ring)

The hilt design for this sword was inspired by one of the Witcher video game weapons. It’s mounted with a sharp Hanwei/Tinker longsword blade. The guard and pommel are stainless steel. The grip is PETG covered in steel wire with stainless steel fittings.

Weight: 3.4 lbs
Blade Length: 35”
Overall Length: 47”
PoB: +2.5

The hilt design for this sword was inspired by one of the Witcher video game weapons. It’s mounted with a sharp Hanwei/Tinker longsword blade. The guard is by Mike Jia. The grip is PETG covered in steel wire with stainless steel fittings.

This longsword was commissioned as a gift to celebrate finishing a Doctorate degree.

It’s a LOTR ranger-inspired design with elvish text etched in the fuller which translates to "In the absence of war, watchfulness. In war, victory. In painful death, sacrifice."

The pommel features a personalized coat of arms depicting an armored fist and an ouroboros encircling 3 stars.

The blade is a blunt Hanwei/Tinker longsword blade. The guard is a modified piece by Mike Jia.

The grips is covered in dark green leather with a blackened half-wire wrap. The scabbard is black leather over a wood core.

This handsome longsword is the groom’s half of a pair of wedding swords with a Lord of The Rings theme. The hilt is steel, with a grip bound in black leather lace and steel wire with a broad mid-grip ring.

The blade is a Hanwei/Tinker blunt longsword. The tree of Gondor is etched onto each side and faux-gilded in bronze.

The scabbard is black leather over a wood core with steel fittings, and is accompanied by a waist belt and two-point suspension.

Blade Length: ??”
Overall Length: ??”
Weight: ?? lbs
POB: +??”

You can find more information about its companion piece HERE.

This unusual piece is inspired by Curtana, Sword of Mercy, which is one of the swords used in British coronation ceremonies (and thus one of the Crown Jewels).

My version is quite large, more similar in size to one of the other coronation swords. It’s mounted on a modified blade from a Hanwei/Tinker Great Sword of War. The tip of the sword is sheared off to represent the concept of mercy.

The hilt is gold plated steel and the grip is bound in brass wire.

The scabbard fittings are gold plated brass to match the hilt. Theres a flame detail running down the scabbard which is done in heat-set metallic vinyl.

This sword was inspired by Prince Caspian’s sword from the Chronicles of Narnia film of the same name. It’s been re-imagined here as a longsword with somewhat different grip and pommel design.

The 35” long blade is a modified Tinker/Hanwei Sharp Longsword blade. The guard and pommel are steel (the pommel by Printed Armoury), and the waisted grip is PETG covered in blue leather and steel wire. The hilt secures with a 6mm recessed nut.

45.5” long overall, the sword weighs 3.5 lbs and the POB is 3.5” from the quillions.

The scabbard is blue leather over a wooden core with a steel chape.

This sword was inspired by Prince Caspian’s sword from the Chronicles of Narnia film of the same name. It’s a true bastard sword, wieldable with one hand, but with room on the grip for a second. There’s even a short ricasso to accommodate a rapier-style grip.

The 33” long blade is a modified Tinker/Hanwei Sharp Bastard Sword blade with etched text in the fuller on each side. The guard and pommel are laser sintered stainless steel with decorative etching. The grip is PETG covered in antiqued brass wire. The hilt secures with a 6mm recessed hex nut.

42.5” long overall, the sword weighs 3.3 lbs and the POB is 3.25” from the quillions.

Scabbard is made by Windlass— suede leather over a hard leather core makes for a semi-rigid scabbard with an integral belt.

This hand-and-a-half broadsword was inspired by the Dark Sister sword from House Of The Dragon, designed by Peter Johnsson.

It is mounted with a modified sharp Hanwei/Tinker bastard sword blade.  The hilt fittings are cold-blued stainless steel. The grip is leather over PETG with a mid-grip ring. The pommel is threaded 8×1.25mm.

The stats are as follows:

Weight: 2.8 lbs
Overall Length: 44.25”
Blade Length: 33.5”
POB: +3” from base of blade

This sword was inspired by Prince Caspian’s sword from the Chronicles of Narnia film of the same name. It’s a true bastard sword, wieldable with one hand, but with room on the grip for a second. There’s even a short ricasso to accommodate a rapier-style grip.

The 33” long blade is a modified Tinker/Hanwei Sharp Bastard Sword blade. The guard and pommel are laser sintered stainless steel with decorative etching. The grip is PETG covered in antiqued brass wire. The hilt secures with a 6mm recessed hex nut.

42.5” long overall, the sword weighs 3.3 lbs and the POB is 3.25” from the quillions.

Optional scabbard is made by Windlass— suede leather over a hard leather core makes for a semi-rigid scabbard with an integral belt.

This sword was inspired by Jacob Kell’s sword from the film Highlander: Endgame, created by Tony Swatton. The film sword is sometimes a single handed sword and sometimes a two handed sword, depending on the scene. This is sort of an in-between interpretation, with room for two hands on the grip but still easily wielded with one hand.

The rain guard is etched “In Hoc Signo Vinces”—"In this sign thou shalt conquer"

The 33” long blade is a Tinker/Hanwei Sharp Bastard Sword blade. The guard and pommel are laser sintered stainless steel, and the grip is PETG covered in black leather bound with twisted steel wire. The hilt secures via a recessed pommel nut.

42.25” long overall, the sword weighs 3.1 lbs and its POB is about +3” from the guard.

I’ve done a version of this sword with a more screen accurate aluminum blade as well: https://jesse-belsky-stageswords.squarespace.com/sold-aluminum-swords/jacobkell

This sword design is inspired by the weapons in the film First Knight starring Sean Connery and Richard Gere. King Arthur and his knights all wield distinctive single-handed broadswords—I’ve adapted the hilt design to a bastard sword format using the Hanwei/Tinker sharp bastard sword blade.

The guard and pommel are stainless steel. The large crosses on the pommel’s faces are filled with deep blue resin. It’s topped with a crown-shaped pommel nut. The hilt secures with a 6mm nut. The grip is solid PETG covered in black leather and bound with braided wire.

The stats are as follows:

Weight: ? lbs
Overall Length: ?”
Blade Length: 33.5”
POB: +?” from base of blade

Modeled after the family weapon of a certain immortal Scotsman, this sword features a heavily etched cross-guard featuring the owner’s family name. The pommel is marked with a Templar cross. The fittings are etched stainless steel. The grip is brown leather over PETG with a steel half-wire wrap.

The blade is taken from a Hanwei Rhinelander bastard sword.

The scabbard is leather over a wood core.

Blade Length: 35.75”
Overall Length: 46”
POB: +4”
Weight: 3.84 lbs.

At my customer’s request, this hilt design was based on swords used in a recent British production of Macbeth. The blackened stainless fittings are mounted on a Hanwei/Tinker sharp bastard sword blade. The pommel features faux-gilded etching. The grip is PETG with black leather over a spiral riser. The scabbard is snakeskin-patterned cow hide over a wood core.

Blade Length: 33.25”
Overall Length: 42.75”
POB: +4.5”
Weight: 2.7 lbs.

This hand-and-a-half broadsword was inspired by the Dark Sister sword from House Of The Dragon, designed by Peter Johnsson.

It is mounted with a modified  Hanwei/Tinker blunt bastard sword blade for stage combat.  The guard is heat-treated 17-4PH stainless steel. The grip is leather over PETG with a mid-grip ring. The stainless steel pommel is threaded 8×1.25mm.

The stats are as follows:

Weight: 2.9 lbs
Overall Length: 44”
Blade Length: 33.5”
POB: +3” from base of blade

The scabbard is black leather over a wood core.

This bastard sword was inspired by the cover art for Kingdom of Ash by Sarah J. Maas. The cover illustration is by Marci Caruso. On my interpretation the steel guard and pommel are deeply etched with Celtic knotwork and electroplated in brass.

This particular sword was commissioned for a wedding celebration. The pommel sports a pair of 30 mm green agate cabochons and the blade is etched with custom text and a faux gilded flame design that runs the full length of both sides of the blade.

The blunt steel blade is by Nick Cochiolo. The grip is solid PETG covered in black leather and bound with brass wire. The mid-grip ring is etched brass.

Blade Length: 32.5”
Overall Length: 42.75”
POB: +?”
Weight: ?? lbs.

This bastard sword was inspired by the cover art for Kingdom of Ash by Sarah J. Maas. The cover illustration is by Marci Caruso. On my interpretation the steel guard and pommel are deeply etched with Celtic knotwork and electroplated in brass. The pommel sports huge 30 mm faceted ruby glass cabochons on each side—I can do these in red, or I have some other alternatives including blue glass and several beautiful polished shell options.

The sharp steel blade is by Hanwei. Etching runs down both sides of the blade, picked out with faux-gilding.

The grip is solid PETG covered in black leather and bound with brass wire. The mid-grip ring is brass.

Blade Length: 33.5”
Overall Length: 42.5”
POB: +3.5”
Weight: 3.13 lbs.

This bastard sword was inspired by the cover art for Kingdom of Ash by Sarah J. Maas. The cover illustration is by Marci Caruso. On my interpretation the steel guard and pommel are deeply etched with Celtic knotwork and electroplated in brass. The pommel sports huge 30 mm faceted glass cabochons on each side.

The sharp steel blade is a re-profiled Windlass blade. Etching runs down both sides of the blade.

The grip is solid PETG covered in black leather and bound with brass wire. The mid-grip ring is etched brass.

Blade Length: 32.5”
Overall Length: 42.75”
POB: +4”
Weight: 3.3 lbs.

The scabbard (also by Windlass) is leather with black-painted steel fittings.

This commissioned bastard sword was inspired by the cover art for Kingdom of Ash by Sarah J. Maas. The cover illustration is by Marci Caruso. On my interpretation the steel guard and pommel are deeply etched with Celtic knotwork and electroplated in brass. The pommel sports huge 30 mm faceted glass cabochons on each side.

The blunt steel blade was made by Castille Armory. Etching runs down both sides of the blade.

The grip is solid PETG covered in black leather and bound with brass wire. The mid-grip ring is etched brass.

Blade Length: 33”
Overall Length: 43.5”
POB: +4.5”
Weight: 3.5 lbs.

The scabbard is leather over a wood core with a brass chape.

This commissioned bastard sword was inspired by the cover art for Kingdom of Ash by Sarah J. Maas. The cover illustration is by Marci Caruso. On my interpretation the steel guard and pommel are deeply etched with Celtic knotwork and electroplated in brass. The pommel sports huge 30 mm faceted glass cabochons on each side.

The blunt steel blade was made by Castille Armory. Etching runs down both sides of the blade.

The grip is solid PETG covered in black leather and bound with brass wire. The mid-grip ring is etched brass.

Blade Length: 33”
Overall Length: 43.5”
POB: +4.5”
Weight: 3.5 lbs.

The scabbard is leather over a wood core with a brass chape.

This commissioned bastard sword was inspired by the cover art for Kingdom of Ash by Sarah J. Maas. The cover illustration is by Marci Caruso. On my interpretation the steel guard and pommel are deeply etched with Celtic knotwork and electroplated in brass. The pommel sports huge 30 mm faceted glass cabochons on each side.

The sharp steel blade was made by Castille Armory. A glyph and text are etched on each side.

The grip is solid PETG covered in black leather and bound with brass wire. The mid-grip ring is etched brass.

Blade Length: 33”
Overall Length: 43.5”
POB: +3”
Weight: 3.06 lbs.

This sword was inspired by Jacob Kell’s sword from the film Highlander: Endgame, created by Tony Swatton. The film sword is sometimes a single handed sword and sometimes a two handed sword, depending on the scene. This is sort of an in-between interpretation, with room for two hands on the grip but still easily wielded with one hand.

The rain guard is etched “In Hoc Signo Vinces”—"In this sign thou shalt conquer"

The 33.5” long blade is a Tinker/Hanwei Sharp Bastard Sword blade. The guard and pommel are steel, and the grip is PETG covered in black leather bound with twisted steel wire. Small crosses are soldered to each face of the pommel. The hilt secures via a recessed pommel nut.

43” long overall, the sword weighs 3 lbs and its POB is about +4” from the guard.

I’ve done a version of this sword with a more screen accurate aluminum blade as well: https://jesse-belsky-stageswords.squarespace.com/sold-aluminum-swords/jacobkell

This sword is the groom’s half of a pair of wedding swords. The design features the Galilean moons of Jupiter on the blade and a personal monogram of the couples’ own devising on one side of the brass hilt and a diagram of planetary alignments on the other.

The short leaf blade is by Albion Swords (a Jody Samson design), finish ground by me. The guard is brass, and the grip walnut with a brass spacing ring in the middle. The hilt secures with a recessed hex nut hidden below a brass cap.

The scabbard is blue leather over a wood core with carved details and brass knotwork bands to attaching it to a brass knotwork belt clip.

For more info on it’s companion piece, click HERE.

This sword was inspired by Jacob Kell’s sword from the film Highlander: Endgame, created by Tony Swatton. The film sword is sometimes a single handed sword and sometimes a two handed sword, depending on the scene. This is sort of an in-between interpretation, with room for two hands on the grip but still easily wielded with one hand.

The 33.5” long blade is a Tinker/Hanwei Sharp Bastard Sword blade. The guard and pommel are steel, and the grip is PETG covered in black leather with twisted steel wire. Small crosses are soldered to each face of the pommel. The hilt secures via a recessed pommel nut.

43” long overall, the sword weighs 3 lbs and its POB is about +4” from the guard.

I’ve done a version of this sword with a more screen accurate aluminum blade as well: https://jesse-belsky-stageswords.squarespace.com/sold-aluminum-swords/jacobkell

This commission was inspired by Robert Gould's illustrations of Stormbringer, the magical sword of Elric from Michael Moorcock’s novels. The sharp steel blade is by Ryan Sword, as is the rune etching. The guard and pommel are distressed and blued steel. The grip collar is 3D printed in bronze-infused stainless steel and mounted with red jasper cabochons. The grip is PETG covered in leather. The pommel secures with a recessed hex nut.

Weight: 3.5 lbs
Balde Length: 35”
Overall Length: 44.5”
POB: +3.5”

This sword was inspired by Prince Caspian’s sword from the Chronicles of Narnia film of the same name. It’s a true bastard sword, wieldable with one hand, but with room on the grip for a second. There’s even a short ricasso to accommodate rapier-style grip.

The 33” long blade is a modified Tinker/Hanwei Sharp Bastard Sword blade. The guard and pommel are etched steel, and the grip is PETG covered in antiqued brass wire. The hilt secures with a 6mm pommel nut.

43” long overall, the sword weighs 3.9 lbs and the POB is 2.5” from the quillions, which is right in front of the guard.

Scabbard is leather over a wood core with a steel chape.

This sword was inspired by Jacob Kell’s sword from the film Highlander: Endgame, created by Tony Swatton. The film sword is sometimes a single handed sword and sometimes a two handed sword, depending on the scene. This is sort of an in-between interpretation, with room for two hands on the grip but still easily wielded with one hand.

The 33.5” long blade is a Tinker/Hanwei Sharp Bastard Sword blade. The guard and pommel are steel, and the grip is PETG covered in black leather with twisted steel wire. Small crosses are soldered to each face of the pommel. The hilt secures via a recessed pommel nut.

43” long overall, the sword weighs 3 lbs and its POB is about +4” from the guard.

I’ve done a version of this sword with a more screen accurate aluminum blade as well: https://jesse-belsky-stageswords.squarespace.com/sold-aluminum-swords/jacobkell

This short sword was inspired by the weapon “Wind Cleaver” from the Throne of Glass series by Sarah J. Maas. I’ve done a blunt version all in black, but I decided to have a bit more fun with this one.

The crossguard and faceted pommel are laser sintered stainless steel. The PETG grip is covered in blue stingray skin. The sharp blade was made by Wes Beem from 80CrV2 steel. Pommel is threaded 8×1.25mm

The scabbard is snakeskin-embossed leather over a wood core with a stainless steel chape.

Weight: 2.4 lbs
Overall Length: 33”
Blade Length: 26.25”
POB: +3.5” from base of blade

This sword was inspired by Errol Flynn’s nimble single-handed broadsword from the 1938 film The Adventures of Robin Hood. It’s mounted with a modified Hanwei/Tinker sharp bastard sword blade shortened for easy handling in golden-age film swashbuckling style.

The guard and pommel are stainless steel. The pommel secures with a 6mm recessed hex nut. The grip is solid PETG covered in black leather with twisted steel wire and a steel ferrule.

The scabbard is black leather with steel fittings.

The stats are as follows:

Weight: 2.45 lbs
Overall Length: 37”
Blade Length: 30”
POB: +4.5” from base of blade

This sword was inspired by the weapon Hawkeye wields as Ronin. The sharp steel blade was made by Castille Armory. The tsuba/guard section is made of blued steel while the grip is 3D printed in sintered nylon.

The sword secures with a 6mm recessed hex nut

Overall length: 34”
Blade Length: 24”
Weight: 2.3 lbs

This sword was inspired by Errol Flynn’s nimble single-handed broadsword from the 1938 film The Adventures of Robin Hood. It’s mounted with a modified Hanwei/Tinker sharp bastard sword blade shortened for easy handling in golden-age film swashbuckling style.

The guard and pommel are 3D-printed bronze-infused stainless steel plated in nickel. The pommel secures with a 6mm recessed hex nut. The grip is solid PETG covered in black leather with twisted steel wire.

The scabbard has a wood-lined fiberglass core covered in black leather with steel fittings. The 3”-wide belt is brown leather with a handmade brass buckle and brass pyramid studs.

The stats are as follows:

Weight: 2.45 lbs
Overall Length: 37”
Blade Length: 30”
POB: +4.5” from base of blade

This sword was inspired by Errol Flynn’s nimble single-handed broadsword from the 1938 film The Adventures of Robin Hood. It’s mounted with a modified Hanwei/Tinker sharp bastard sword blade shortened for easy handling in golden-age film swashbuckling style.

The guard and pommel are 3D-printed bronze-infused stainless steel plated in nickel. The pommel secures with a 6mm recessed hex nut. The grip is solid PETG covered in black leather with twisted steel wire.

The scabbard has a wood-lined fiberglass core covered in black leather with steel fittings. The 3”-wide belt is brown leather with a handmade brass buckle and brass pyramid studs.

The stats are as follows:

Weight: 2.45 lbs
Overall Length: 37”
Blade Length: 30”
POB: +4.5” from base of blade

This rapier, scabbard and hanger were built based on a portrait of Kenau Simonsdr Hasselaar, a 16th century Dutch folk hero. The structure is simple, with a single side ring, knucklebow, and straight quillions. The hilt is plated in brass, and the grip is bound in brass wire. The scabbard is black leather over a flexible core with a bronze chape from Tod Cutler. The rapier hanger is made from brown leather with custom designed fittings in 3D-printed stainless steel with a brass brush plating. Several additional pommels were supplies, also plated in brass.

It is mounted with a 35” modified hanwei practice rapier blade intended for stage combat. The pommel is threaded 6x1mm.

This rapier was inspired by Wesley’s sword from The Princess Bride.  The guard is an ambidextrous two ring design, simple but elegant. Good if you’re left handed or just pretending to be. ….

The guard and pommel are stainless steel. The grip is solid PETG covered in black leather lace.

It’s mounted with a sharpened Kingston Arms rapier blade.

Scabbard is black leather with white brass fittings.

This rapier was inspired by Wesley’s sword from The Princess Bride.  It's an ambidextrous two ring design, simple but elegant.

The guard and pommel are steel. The grip is solid PETG covered in black leather lace.

It’s mounted with a sharpened 34” Hanwei Practice Rapier blade.

Scabbard is black leather over a flexible core with steel and nickel silver fittings.

This rapier was inspired by Wesley’s sword from The Princess Bride.  It's an ambidextrous two ring design, simple but elegant.

The guard and pommel are steel. The grip is solid PETG covered in black leather lace.

It’s mounted with a 34” Hanwei Practice Rapier blade which is available sharp or blunt.

Weight: 1.6 lbs
Overall Length: 40”
Blade Length: 34”
POB: +3.5”

Available with a flex-core leather covered scabbard with steel fittings.

This rapier was inspired by Wesley’s sword from The Princess Bride.  It's an ambidextrous two ring design, simple but elegant.

The guard and pommel are steel. The grip is solid PETG covered in black leather lace.

It’s mounted with a 34” Hanwei Practice Rapier blade which is available sharp or blunt.

Weight: 1.6 lbs
Overall Length: 40”
Blade Length: 34”
POB: +3.5”

Available with a flex-core leather covered scabbard with steel fittings.

This rapier was inspired by the Musketeer’s sword in the 90’s Disney version of the Three Musketeers.

The guard is laser sintered stainless steel, blackened, with the recessed decorative details highlighted with faux-gilding.

The grip is solid PETG covered in white leather bound with brass wire. The pommel is mild steel, threaded 6x1mm, with faux-gilded fluting.

It’s available mounted with a sharp 37” Kingston Arms rapier blade. A blunt version is also available. The blunt blade is shown in the pictures.

The scabbard is black leather with brass fittings.

This flashy rapier was inspired by D’Artagnan’s sword in the 90’s Disney version of the Three Musketeers. I wasn’t able to find any clear photos of the screen prop, so this is a fairly loose interpretation.

The hilt is mild steel plated in brass, with all the bar elements hammer-faceted to make it glitter in the light when it moves. The grip is solid PETG wound with stainless steel wire. The pommel secures with a pommel nut threaded 6x1mm.

It’s mounted with a modified 38” Hanwei practice rapier blade, sharpened at the tip.

The blade is 38.5” long.

The matching dagger has a 12” blade.

This flashy rapier was inspired by D’Artagnan’s sword in the 90’s Disney version of the Three Musketeers. I wasn’t able to find any clear photos of the screen prop, so this is a fairly loose interpretation.

The hilt is mild steel plated in brass, with all the bar elements hammer-faceted to make it glitter in the light when it moves. The grip is solid PETG wound with stainless steel wire. The pommel secures with a pommel nut threaded 6x1mm.

It’s mounted with a modified 38” Hanwei practice rapier blade, sharpened at the tip.

The blade is 38.5” long.

This rapier was inspired by the Musketeer’s sword in the 90’s Disney version of the Three Musketeers.

The hilt is mild steel with etched details filled with translucent blue epoxy to mimic enameling. The grip is solid PETG covered in black leather with steel wire. The pommel is threaded 6x1mm.

A fileworked steel ferrule on the grip matches the film prop used by Athos.

It’s mounted with a sharp 38” rapier blade by Darkwood Armory.

The scabbard is brown leather over a flexible core with steel and nickel silver fittings.

Overall Length: 44”
Blade Length: 38”
Weight: 2.2 lbs
POB: +4”

This rapier was inspired by the Musketeer’s sword in the 90’s Disney version of the Three Musketeers.

The hilt is mild steel with etched details filled with translucent blue epoxy to mimic enameling. The grip is solid PETG covered in black leather with steel wire. The pommel is threaded 6x1mm.

It’s mounted with a sharp 38” rapier blade by Darkwood Armory.

The scabbard is brown leather over a flexible core with steel and nickel silver fittings.

Overall Length: 44”
Blade Length: 38”
Weight: 2.2 lbs
POB: +4”

This rapier was inspired by the Musketeer’s sword in the 90’s Disney version of the Three Musketeers.

The hilt is mild steel with etched details filled with translucent blue epoxy to mimic enameling. The grip is solid PETG covered in black leather with steel wire. The pommel is threaded 6x1mm.

It’s mounted with a blunt Hanwei Practice Rapier blade for stage combat.

The scabbard is brown leather with white brass fittings.

Overall Length: 41”
Blade Length: 35”
Weight: 2.23 lbs
POB: +3”

If you’re interested in this left-handed hilt mounted with a different blade, send me an email at info@jessebelsky.com

This rapier was inspired by the Musketeer’s sword in the 90’s Disney version of the Three Musketeers. It’s mounted here with a broad 42” rapier blade made by Balefire Blades.

The hilt is mild steel with etched details, some filled with translucent blue epoxy to mimic enameling. The grip is solid PETG covered in black leather with steel wire. The pommel is threaded 6x1mm.

Weight: 2.95 lbs.
POB: +4.75”
Blade Length: 42”
Overall Length:  

This rapier was inspired by the Musketeer’s sword in the 90’s Disney version of the Three Musketeers.

The hilt is mild steel with etched details filled with translucent blue epoxy to mimic enameling. The grip is solid PETG covered in black leather with steel wire. The pommel is threaded 5/16-18.

It’s mounted with a 38” rapier blade made from 7075-T6 Aluminum.

The scabbard is brown leather over a fiberglass core with polished aluminum fittings.

Overall Length: 44”
Blade Length: 38”
Weight: 1.95 lbs
POB: +3”

This rapier was inspired by the Musketeer’s sword in the 90’s Disney version of the Three Musketeers.

The hilt is mild steel with etched details filled with translucent blue epoxy to mimic enameling. The grip is solid PETG covered in black leather with steel wire. The pommel is threaded 6x1mm.

It’s mounted with a sharp 38” rapier blade by Darkwood Armory.

The scabbard is brown leather over a flexible core with steel and nickel silver fittings.

Overall Length: 44”
Blade Length: 38”
Weight: 2.2 lbs
POB: +4”

The matching parrying dagger has a sharp 11.5” blade and a shell guard etched and epoxy filled to match the rapier. The scabbard is brown leather over a flexible core with steel and nickel silver fittings.

Overall Length: 17”
Blade Length: 11.5”
Weight: 1.1 lbs
POB: +0”

This rapier was inspired by the Musketeer’s sword in the 90’s Disney version of the Three Musketeers, specifically the prop belonging to Athos, which had a unique fileworked ferrule on the grip.

The hilt is mild steel with etched details, some filled with translucent blue epoxy to mimic enameling. The grip is solid PETG covered in black leather with steel wire. The pommel is threaded 6x1mm.

It’s mounted with a sharp 38” Darkwood rapier blade.

Scabbard has a flexible core covered in brown leather with steel fittings.

This rapier was inspired by the Musketeer’s sword in the 90’s Disney version of the Three Musketeers.

The hilt is mild steel with etched details, some filled with translucent blue epoxy to mimic enameling. The grip is solid PETG covered in black leather with steel wire. The pommel is threaded 6x1mm.

It’s mounted with a modified 38” Hanwei practice rapier blade, sharpened at the tip.

Scabbard has a flexible core covered in brown leather with steel fittings.

This rapier was commissioned as an engagement gift for a lucky gentleman. The design is inspired by the 90’s Disney version of the Three Musketeers, but in this case the hilt is symmetrical with double rings and etched crosses on both sides. One cross reads “To Have And To hold” and the other reads “To Love And Cherish”.

The hilt is gold plated steel with etched details. The grip is solid PETG covered in white leather bound with brass wire. The pommel is threaded 6x1mm.

It’s mounted with a sharp 37” Hanwei rapier blade.

The scabbard is made with a flexible core covered in white leather with brass fittings. The belt clip hanger is also brass.            

Weight: 2.4 lbs
Overall Length: 44”
Blade Length: 37”
POB: +2.5”

This rapier is inspired by Inigo Montoya’s sword from The Princess Bride. The rapier hilt is brass-plated stainless steel and has an ambidextrous two ring design covered in etching.

The spiral carved grip is PETG covered in white leather with twisted brass wire and floral patterned brass ferrules. The ricasso is covered in a leather sleeve decorated with gold foil.

It’s mounted with a 36” sharp rapier blade from Darkwood Armory. The pommel is direct threaded 6mm.

The scabbard is brown leather with brass fittings.

Inspired by Inigo Montoya’s sword from The Princess Bride, this rapier hilt is brass-plated steel and has an ambidextrous two ring design covered in etching.

The spiral carved grip is PETG covered in white leather with twisted brass wire.

It’s mounted with a 40” HEMA rapier blade by Castille Armory. The pommel is direct threaded 6mm.

Weight is 2.25 lbs, and the POB is +2.5” from the base of the ricasso. The sword is 46.5” long overall.

My fourth version of this design, inspired by Inigo Montoya’s sword from The Princess Bride. The rapier hilt is brass-plated steel and has an ambidextrous two ring design covered in etching.

The spiral carved grip is PETG covered in pebbled white leather with twisted brass wire and floral patterned brass ferrules. The ricasso is covered in a leather sleeve decorated with gold foil.

It’s mounted with a 36” sharp rapier blade from Darkwood Armory. The pommel is direct threaded 6mm.

The scabbard is brown leather over a flexible core with brass fittings.

This rapier was inspired by Inigo Montoya’s sword from The Princess Bride.  It's an ambidextrous two ring design featuring ornate etching on all of its surfaces.

The hilt is steel and the spiral carved grip is PETG covered in black leather with twisted steel wire.

It’s mounted with a Castille rapier blade for HEMA.

Overall weight is 2.35 lbs, and the POB is +3.5”. The blade is 41” long. Overall length 47”.

[THIS SWORD IS PRE-OWNED, BUT IN AS-NEW CONDITION. IT HAS BEEN WELL CARED FOR BY A COLLECTOR WHO NEEDED TO PART WITH IT, SO IT IS AVAILABLE ONCE AGAIN! ]

My third version of this design, inspired by Inigo Montoya’s sword from The Princess Bride. The rapier hilt is brass-plated steel and has an ambidextrous two ring design covered in etching.

The spiral carved grip is PETG covered in white leather with twisted brass wire and floral patterned brass ferrules. The ricasso is covered with a leather sleeve decorated with gold foil.

It’s mounted with a 36” sharp rapier blade from Darkwood Armory. The pommel is direct threaded 6mm.

Weight is 2.67 lbs, and the POB is +2.75” from the base of the ricasso. The sword is 42.5” long overall.

The scabbard is brown leather over a flexible core with brass fittings.

This rapier was inspired by Inigo Montoya’s sword from The Princess Bride.  It's an ambidextrous two ring design featuring ornate etching on all of its surfaces.

The hilt is steel and the spiral carved grip is PETG covered in black leather with twisted steel wire.

It’s mounted with a Hanwei Practice Rapier blade which has been sharpened.

Overall weight with sharp blade is 2.57 lbs, and the POB is just in front of the hilt. The blade is 37” long.

This was a fully commissioned package—sword, scabbard and baldric. The rapier’s ambidextrous two ring design and etching was inspired by Inigo Montoya’s sword from The Princess Bride, but with a very different surface finish. The etched designs are faux-gilded with fine bronze and aluminum powder to stand out on the blued finish of the steel.

The hilt is mild steel, made large to accommodate a bulky HEMA gauntlet. The spiral carved grip is PETG covered in red leather with twisted brass and steel wire and finished with brass ferrules.

It’s mounted with a 32” Castille Sidesword blade for HEMA combat. The pommel is direct threaded 8mm.

Overall weight is ?? lbs, and the POB is just in front of the hilt. The blade is 32” long.

The scabbard has a wood core covered in red veg tan leather, finished with steel fittings etched to match the hilt. The red leather baldric has 4 adjustable buckles in the frog section. The large shoulder buckle, strap keeper and tip are castings by Richard Lanni (Bucklecastings).

This sword is based on the “Toledo Salamanca” sword from Highlander 1. It’s built using a rare vintage Marto cast brass hilt. The sharp blade was custom made by Darkwood Armory. The grip is faux ivory with brass ferrules, and the ricasso is wrapped in green velvet.

The customer who bought it requested some additional upgrades, so I found a jeweler who could put in the scores of cubic zirconia and synthetic rubies that adorn the film prop. Then the hilt was plated in gold.

Blade Length: 38.5”
Overall Length: 44.5”
POB: 2.9 lbs.
Weight: +4.75”

This sword is based on the “Toledo Salamanca” sword from Highlander 1. It’s built using an old Marto cast hilt I found at an antique dealers. The sharp 38” blade was custom made by Darkwood Armory. The grip is made from faux ivory with brass bands, and the ricasso is wrapped in green velvet.

This unusual cup hilt rapier is inspired by the film prop sword that Frank Langella fought with in 1974 film The Mark of Zorro. The pierced cup hilt is made of brass brush-plated stainless steel. The quillions and pommel are mild steel. The grip is solid PETG wrapped in brass wire. The blade is a 35” Hanwei Practice Rapier blade.

This rapier was inspired by the Sword of Seiros from the video game Fire Emblem: Three Houses. In the game-related art the sword is ambiguously sized—sometimes it’s represented as a rapier-sized weapon, sometimes more of a longsword. My sword is proportioned like a short rapier or sidesword. It features a deeply etched steel hilt and a custom flamberge blade by Castille Armoury. The grip is wire over PETG with brass ferrules. The etched scabbard furniture is nickel silver. The scabbard itself is leather over a wood core . The etched design on the blade is faux gilded in bronze.

Blade Length: 36”
Overall Length: 42”
POB: +3.25”
Weight: 2.08 lbs.

This rapier was inspired by the Sword of Seiros from the video game Fire Emblem: Three Houses. In the game-related art the sword is ambiguously sized—sometimes it’s represented as a rapier-sized weapon, sometimes more of a longsword. My sword is proportioned like a short rapier or sidesword. It features a deeply etched steel hilt electroplated in gold and a custom flamberge blade by Castille Armoury. The grip is made of imitation ivory with a gold plated steel spacer and gold plated ferrules. The etched scabbard furniture is also plated in gold. The scabbard itself is leather over a flexible core with shaped risers beneath the outer layer of leather. The etched design on the blade faux gilded in bronze.

Blade Length: 36”
Overall Length: 42”
POB: +3.25”
Weight: 2.08 lbs.

This simple but elegant rapier is the bride’s half of a pair of wedding swords with a Lord of The Rings theme. The scrolled floral hilt is steel, as is the pommel.

The blade is a modified Hanwei practice rapier. The ricasso is etched with a leaf of Lorien, faux gilded in bronze. The grip is green leather over a PETG core.

The scabbard is green leather over a flexible core with steel fittings, and the baldric is hand-stitched.

Blade Length: 36”
Overall Length: ??”
Weight: ?? lbs
POB: +??”

You can find more information about its companion piece HERE.

This intricately decorated rapier is the bride’s half of a pair of wedding swords. The primary theme is galactic navigation a la the Stargate film and television franchise, but we’ve incorporated a copy of the dial of a real astrolabe into the design.

The side ring and quillions are etched with Stargate symbology, as is the hollow ring pommel. The whole hilt is blued steel with the etching areas filled with faux gilding. The grip is leather over PETG bound with brass wire and brass ferrules.

The blade of the sword (by Darkwood Armory) is etched with the Stargate address for planet Earth and a personal sigil designed by the couple to represent their union.

The scabbard is green leather over a flexible core with brass fittings.

Blade Length: 36”
Overall Length: 42”
Weight: 2.15 lbs
POB: +4.25”

You can find more information about its companion piece HERE.

This rapier was commissioned as a wedding gift from a lady to her gentleman. He's a big Lord of The Rings fan, so the design references the love of Aragorn and Arwen. The outside of the guard features the White Tree of Gondor flanked by crowns. On the other side is the Evenstar, given to Aragorn by Arwen as a token of her love. The first letters of each of their names are also incorporated into the artwork in Elvish script.

The hilt is an ambidextrous design with an etched shield on each side supported by curling branches in blackened steel with the etching picked out in silver faux-gilding. The grip is solid PETG covered in black leather and bound with steel wire. It is mounted with a 38” sharp rapier blade by Darkwood Armory which features undulating etching down its length.

A leather covered flexible-core scabbard with a steel chape completes the package.

Overall Length: 44”
Blade Length: 38”
Weight: 2.55 lbs
POB: +3.5”

This sword is inspired by King Miraz’s sword from the Chronicles of Narnia film Prince Caspian. The original film prop was created by Peter Lyon of Weta Worksop. My version has a pair of stacked side rings in more traditional form, rather than the lower side ring and oval-shaped upper ring of the movie sword.

The ambidextrous steel hilt is covered in recessed panels of decorative etching and plated in brass. The grip is solid PETG covered in black leather with brass wire. It’s mounted with a strongly tapering sharp sidesword blade made by Darkwood Armory.

Weight: 2.6 lbs
Blade Length: 34”
Total Length: 40”
POB: +4”

The scabbard is black leather over a flexible core with etched brass fittings and a belt clip suspension.

This dagger was inspired by the weapons used by V in the film V For Vendetta. The sharp blade is high carbon steel. The guard and pommel are stainless steel. The grip is PETG covered in leather and bound with steel wire.

This one has had the blade etched and faux-gilded for a wedding proposal.

Overall Length: 16.5”
Blade Length: 11”

This dagger was inspired by the weapons used by V in the film V For Vendetta. The sharp blade is high carbon steel. The guard and pommel are stainless. The grip is PETG covered in leather and bound with steel wire.

Includes a black leather scabbard with steel fittings.

Overall Length: 16.5”
Blade Length: 11”

This dagger design was inspired by the weapons used by V in the film V For Vendetta. The blade is high carbon steel. The guard and pommel are stainless. The grip is PETG covered in leather and bound with steel wire.

Overall Length: 16.5”
Blade Length: 11”

Price is for a single dagger, but I have two available.

This dagger was inspired by the weapons used by V in the film V For Vendetta. The blade is high carbon steel. The guard and pommel are stainless. The grip is PETG covered in leather and bound with steel wire.

Overall Length: 16.5”
Blade Length: 11”

This dagger was inspired by the weapons used by V in the film V For Vendetta. The blade is by Darkwood Armory. The guard and pommel are stainless steel. The grip is PETG covered in leather and bound with steel wire.

Overall Length: 15.5”
Blade Length: 10”
Weight: 0.67 lbs

These daggers were inspired by the weapons used by V in the film V For Vendetta. The blades were made by Darkwood Armory. The guards and pommels are stainless steel. The grips are PETG covered in leather and bound with steel wire.

Overall Length: 15.5”
Blade Length: 10”
Weight: 0.67 lbs

This dagger has a slender single edged blade with a long false edge towards the tip. It’s loosely based on a knife briefly wielded by Antonio Banderas in The Mask Of Zorro. The grip is red oak with steel fittings and brass tacks.

Includes a black leather sheath with a steel chape.

These swords were inspired by Zorro’s sword from the classic TV series starring Guy Williams.

They are mounted with a 35” Musketeer epee blades by HF Armory.

The guards are laser sintered 316L stainless steel. The grips are solid PETG covered in black leather lace.

The pommels are threaded 6mm. Scabbards are heavy leather with white brass fittings.

Overall Length: 41”
Blade Length: 35”
Weight: 1.55 lbs
POB: +3”

This saber was built for HEMA fencing with a slightly enlarged version of a 1850 Foot Officer’s hilt, able to accommodate a fencing gauntlet. The guard and pommel cap are made in 316L stainless steel instead of cast brass. The grip is PETG covered in leather and bound with brass wire.

It’s mounted with a 20mm Italian Dueling Saber blade by Castille Armory.

The hilt secures with a pommel nut.

Blade Length: 34”
Overall Length: 40”
POB: +2.75”
Weight: 1.9 lbs

This HEMA saber design was inspired by a piece from the Helldivers 2 video game. That one has a gold finish, but we opted for a blackened hilt for durability. The guard and grip fittings are laser sintered stainless steel. The grip is PETG covered in black pigskin. It’s mounted with Castille Armory’s 23mm Light Artillery Saber blade.

Blade Length: 32”
Overall Length: 39”
POB: +3”
Weight: 2.12 lbs.

This sword is inspired by Zorro’s sword from the classic film starring Tyrone Powers. It was built using a vintage saber guard provided by the customer.

It’s mounted with a 35” sharp double edged blade.

The grip is leather over wood.

The scabbard is black leather over a flexible core with nickel plated brass fittings.

This sword is inspired by Zorro’s sword from the 1975 film starring Alain Delon.

It’s mounted with a 31” Hanwei practice rapier blade for use in SCA rapier combat.

The hilt is carved brass.  The grip is hardwood wound with brass wire.

This sword is inspired by Zorro’s sword from the classic TV series starring Guy Williams

It’s mounted with a 35” blunt blade adapted from a Hanwei Practice rapier blade.

The guard is stainless steel, made by Zen Warrior Armory. The grip is solid PETG covered in black leather lace.

The pommel secures with a recessed hex bolt.

The scabbard is black leather with white brass fittings.

This sword is inspired by Zorro’s sword from the classic TV series starring Guy Williams

It’s mounted with a 34.5” sharp double edged blade adapted from sharp Hanwei rapier blade.

The guard is stainless steel, made by Zen Warrior Armory. The grip is solid PETG covered in black leather lace.

The pommel secures with a recessed hex bolt.

Weight: 1.3 lbs
Blade Length: 34.5”
Total Length: 41”
POB: +4.5”

This is available with a black leather scabbard with white brass fittings—see here.

This sword is inspired by Zorro’s sword from the classic TV series starring Guy Williams

It’s mounted with a 34.5” sharp double edged blade.

The guard is stainless steel, made by Zen Warrior Armory.  The grip is solid PETG covered in black leather lace.

Weight: 1.4 lbs
Blade Length: 34.5”
Total Length: 41.5”
POB: +4”

The scabbard is black leather over a flexible core with nickel silver fittings, and has a matching belt and sword frog.

This sword is inspired by Zorro’s sword from the 1990’s TV show starring Duncan Regehr.

It’s mounted with a blunt 37” Hanwei practice rapier blade.

The guard is 16 ga. mild steel. The grip is solid PETG covered in black leather lace. Secures with a recessed hex nut.

Weight: 1.7 lbs
Blade Length: 37”
Total Length: 42.5”
POB: +4.5”

This sword is inspired by Zorro’s sword from the 1990’s TV show starring Duncan Regehr.

It’s mounted with a sharp 37” Hanwei rapier blade.

The guard is 16 ga. mild steel. The grip is solid PETG covered in black leather lace. Secures with a recessed hex nut.

The scabbard is black leather with white brass fittings.

Weight: 1.7 lbs
Blade Length: 37”
Total Length: 42.5”
POB: +4.5”

This sword is inspired by Zorro’s sword from the 1990’s TV show starring Duncan Regehr.

It’s mounted with a sharp 37” Hanwei rapier blade.

The guard is 16 ga. mild steel. The grip is solid PETG covered in black leather lace. Secures with a recessed hex nut.

Weight: 1.7 lbs
Blade Length: 37”
Total Length: 42.5”
POB: +4.5”

This sword is inspired by Zorro’s sword from the 1990’s TV show starring Duncan Regehr.

It’s mounted with a 30” Hanwei practice rapier blade for use in SCA rapier combat.

The hilt is 16 ga. mild steel.  The grip is solid PETG covered in black leather lace.

Weight: 1.6 lbs
Blade Length: 30”
Total Length: 35.5”

This sword is inspired by Zorro’s sword from the film The Mask of Zorro with Antonio Banderas and Anthony Hopkins, made by Tony Swatton. It’s mounted with a bunt 31” blade made from a Hanwei Practical Rapier blade.

The hilt is etched and carved steel. The grip is solid PETG covered in black leather with nickel plated tacks and steel ferrules.

Weight: 1.87 lbs
Blade Length: 31”
Total Length: 38”
POB: +1.5”

Sword comes with a heavy leather scabbard with white brass fittings.

This sword is inspired by Zorro’s sword from the film The Mask of Zorro with Antonio Banderas and Anthony Hopkins, made by Tony Swatton. It’s mounted with a narrow 31” blade made from a Hanwei Practical Rapier blade.

The hilt is etched and carved steel. The grip is solid PETG covered in black leather with nickel plated tacks and steel ferrules.

Weight: 1.87 lbs
Blade Length: 31”
Total Length: 38”
POB: +1.5”

The scabbard is leather over a wood core with steel fittings and a belt clip suspension.

This sword is inspired by Zorro’s sword from the film The Mask of Zorro with Antonio Banderas and Anthony Hopkins, made by Tony Swatton. It’s mounted with a narrow 31” blade made from a Hanwei Practical Rapier blade. This is available sharp or blunt.

The hilt is etched and carved steel. The grip is solid PETG covered in black leather with nickel plated tacks and steel ferrules.

Weight: 1.87 lbs
Blade Length: 31”
Total Length: 38”
POB: +1.5”

Sword comes with a heavy leather scabbard with white brass fittings.

This sword is inspired by Zorro’s sword from the film The Mask of Zorro with Antonio Banderas and Anthony Hopkins, made by Tony Swatton. It’s mounted with a 39” Rapier blade from Darkwood Armory.

The hilt is etched and carved steel.  The grip is solid PETG covered in black leather with nickel plated tacks and steel ferrules.

Weight: 2.0 lbs
Blade Length: 39”
Total Length: 46.25
POB: +4”

A second crack at a sword inspired by Zorro’s sword from the classic swashbuckling film The Mask of Zorro with Antonio Banderas and Anthony Hopkins.  

The hilt is etched steel.  The blade is a Hanwei practice rapier blade trimmed down to 31” to match the real movie props made by Tony Swatton. The sword is 38” overall, weighs 1.9 lbs. and balances 1.5" in front of the guard.  The grip is leather covered hardwood with brass tacks.

Inspired by Zorro’s sword from the classic swashbuckling film The Mask of Zorro with Antonio Banderas and Anthony Hopkins.  

The hilt is etched steel.  The blade is a Zen Warrior diamond schlager trimmed down to 30” to match the real movie props made by Tony Swatton. The sword is 36.5” overall, weighs 1.75 lbs. and balances right at the guard.  The grip is leather covered hardwood with steel ferrules and nickel plated brass tacks.

This HEMA practice sword is modeled on Zorro’s sword from the film “The Mask of Zorro”. I built it for a customer who had already bought a fully detailed Zorro replica sword with a Darkwood blade, but decided it was too pretty to fence with. So this version is pared back without decorative etching. It is also made from slightly heaver stock to put up with full contact sparring.

The practice version is also mounted with a Darkwood blade, in this case their Spadroon trainer, modified to eliminate the ricasso and leave a 31” blade.

The hilt is mild steel. The shell hilt is made of a 13 ga. steel. The pommel is threaded 6mm metric. Grip is PETG covered in black leather.

Weight: 2.0 lbs
Blade: 31"
OA length: 38"
POB: +1.5”

This HEMA practice sword is modeled on Zorro’s sword from the film “The Mask of Zorro” but with the detail pared back.

This is currently mounted with a 31” Hanwei practice blade (from their Practical Mortuary). It’s fairly stiff, but does have some flex.

The hilt is 1/4” mild steel. The shell hilt is made of a 13 ga. steel. The pommel is threaded 6mm metric. Grip is PETG covered in durable heath-shrunk rubber.

Weight: 2.2 lbs
Blade: 31"
OA length: 38"
POB: +2”

A black fiberglass scabbard with steel fittings is available as an option (also from the Hanwei Practical Mortuary sword).

Inspired by Elena’s sword from the classic swashbuckling film The Mask of Zorro with Antonio Banderas and Catherine Zeta Jones.  The original movie prop was made by Tony Swatton. It’s a bit of an in-between sword, not quite a rapier and not quite a spadroon or smallsword. But it’s perfect for swashbuckling.

The hilt is carved and etched steel. The grip is solid PETG covered in steel wire with nickel silver ferrules and nickel plated brass balusters. The blade is a cut down Hanwei Practice Rapier, which makes for an excellent lightweight and nimble blade. It’s available sharp or blunt.  

Weight: 1.7 lbs
Blade Length: 31”
Total Length: 37.5”
POB: +2.5”

Inspired by Elena’s sword from the classic swashbuckling film The Mask of Zorro with Antonio Banderas and Catherine Zeta Jones. 

 The original movie prop was made by Tony Swatton, but good photos of it are very difficult to find. This is an interpretation based on film stills. The hilt is etched steel.  The blade is a Zen Warrior diamond schlager.  The grip is leather covered hardwood with twisted wire.

This axe is modeled after by the weapon wielded by Caleb Cole in Highlander: The Series. The axe blade is 3/16” thick 7075-T6 aluminum and is bolted to an aluminum haft. The blade and haft have been painted to match the original prop, and bound with brown leather.

Overall Length: 2’-9”
Balde Length: 13.3”
Weight: 2.5 lbs.

This cutlass/hanger has a hilt purloined from the Hanwei Practical Mortuary Sword paired with the blade from Kingston Arms Shell Guard Cutlass to create a sword inspired by the weapon Captain Flint wields in the first season of Black Sails. That prop weapon was built using this same hilt.

The hilt is stainless steel and secures with a 6mm pommel nut.  The grip is black leather over a wood core bound with steel wire.

The scabbard is black leather over a wood core with stainless steel fittings.

Blade Length: 24”
Overall Length: 30”
POB: +3.25”
Weight: 2.35 lbs.

This cutlass/hanger has a hilt purloined from the Hanwei Practical Mortuary Sword paired with the blade from Kingston Arms Revolutionary War Hanger to create a sword inspired by the weapon Captain Flint wields in the first season of Black Sails. That prop weapon was built using this same hilt.

The hilt is stainless steel and secures with a 6mm pommel nut.  The grip is brown leather over a wood core bound with steel wire.

The scabbard is brown leather over a wood core with steel fittings.

Blade Length: 24”
Overall Length: 30.5”
POB: +2.5”
Weight: 2.25 lbs.

This cutlass/hanger has a hilt purloined from the Hanwei Practical Mortuary Sword paired with the blade from Kingston Arms Revolutionary War Hanger to create a sword inspired by the weapon Captain Flint wields in the first season of Black Sails. That prop weapon was built using this same hilt.

The hilt is stainless steel and secures with a 6mm pommel nut.  The grip is brown leather over a wood core bound with steel wire.

The scabbard is brown leather over a wood core with steel fittings.

Blade Length: 24”
Overall Length: 30.5”
POB: +2.5”
Weight: 2.25 lbs.

This cutlass/hanger has a hilt purloined from the Hanwei Practical Mortuary Sword paired with the blade from Hanwei’s Revolutionary War Hanger to create a sword inspired by the weapon Captain Flint wields in the first season of Black Sails. That prop weapon was built using this same hilt.

The hilt is stainless steel and secures with a 6mm pommel nut. The sharp steel blade has a deeply etched faux-antique finish.  The grip is pebbled black leather over a PETG core bound with steel wire.

The scabbard is leather over a wood core with steel fittings.

Blade Length: 25”
Overall Length: 31”
POB: +4”
Weight: 2.5 lbs.

This cutlass/hanger has a hilt purloined from the Hanwei Practical Mortuary Sword paired with the blade from Hanwei’s Revolutionary War Hanger to create a sword inspired by the weapon Captain Flint wields in the first season of Black Sails. That prop weapon was built using this same hilt.

The hilt is stainless steel and secures with a 6mm. The sharp steel blade has a deeply etched faux-antique finish.  The grip is pebbled black leather over a PETG core bound with steel wire.

The scabbard is leather over a wood core with steel fittings.

Blade Length: 25”
Overall Length: 31”
POB: +4”
Weight: 2.5 lbs.

This saber is inspired by the weapon wielded by the Horseman Caspian in Highlander: The Series (designed by F. Braun McAsh). It’s 36” long overall, with a 30” blade made from 3/16” 7075-T6 Aluminum. The guard is blued steel, and the grip is PETG covered in leather. The sword weighs 1.8 lbs and is quite nimble despite the lack of pommel. The pommel nut is threaded 5/16-18 and attaches to a threaded steel rod pinned to the aluminum tang. For more information on this attachment method, CLICK HERE.

As an aluminum sword it is not sharp, but the pointy bits a fairly pointy. If you intend to use this for stage combat let me know and I will round the points a bit more for safety.

This pirate hook hand is made with a double-forked steel hook, aluminum cup guard, and leather sleeve.  The cup is decorated with decorative rivets and twisted wire.  Hidden inside is a wooded T-bar handle for gripping.

I'm not sure this is exactly the right category for this project, but it will do. This pirate hook hand is made with a steel hook, aluminum cup guard, and leather sleeve.  The cup is decorated with fileworked chicago screws and brass detail.  The leather sleeve is removable so it can be swapped for a softer black leather sleeve.  Hidden inside is a wooded T-bar handle for gripping.

A Peter Pan set....blades in 3/16" aluminum, guards and pommels in steel, with wood/leather grips. 

The Hook is also aluminum and is mounted on a left handed fencers pistol grip via a steel tang that can rotate 90º to change the orientation of the hook.

This cutlass/hanger has a hilt purloined from the Hanwei Practical Mortuary Sword paired with the blade from Kingston Shell Guard Cutlass to create a sword inspired by the weapon Captain Flint wields in the first season of Black Sails. That prop weapon was built using this same hilt.

The hilt is stainless steel and secures with a 6mm pommel nut.  The grip is black leather over a wood core bound with steel wire.

The scabbard is black leather over a wood core with steel fittings.

Blade Length: 24.5”
Overall Length: 31”
POB: +2.75”
Weight: 2.15 lbs.